Below you will find information about our winch models
With our TIBUS high-performance cable winches, the drum is largely protected by special shaft seals against the ingress of dirt and water and against the escape of grease and oil.
For the TIBUS high-performance cable winches, we only use parts that are constantly subjected to strict quality controls. All bearings are from well-known manufacturers. We only use electric motors and relays from well-known manufacturers that have been known for their reliability for many years and that we regularly and extensively test.
Vintage winch 8274 from TIBUS at an unbeatable price of only
1,750 euros
Cable winch TW 10,000 complete with synthetic cable, remote control, aluminum cable window
at a price of 890 euros
This winch features a 6.8 HP motor for a maximum pulling power of 4.5 tons
The cable speed is 18m/min without load
Rope length 27m
Rope diameter 9.5mm
TDS-9.5HC SR
Preis von 980 Euro
SPECIFICATION Line pull:4,309kgs/9,500lbs
Motor: 12V/5.2HP 24V/3.2HP
Gear Train: Three stage Gear Ratio: 156:1
Freespooling Clutch: Rotating ring gear
Synthetic Rope Size: Φ11/31"×90'(Φ9.0mm×27m)
Drum Size: Φ2.5"×9"(Φ63.5mm×229mm)
LINE PULL Layer of Wire Rope Max Line Pull 1 9,500lbs/4,309kgs 2 7,800lbs/3,500kgs 3 6,550lbs/2,977kgs 4 5,700lbs/2,578kgs
LINE SPEED AND AMP DRAW(1st layer of Synthetic rope on the drum)
Load Line Speed AMP Draw(12V) AMP Draw(24V)
No Load 59FPM/18MPM 60 40 2,000lbs/907kgs 15.4FPM/4.7MPM 150 116 4,000lbs/1,814kgs 13.1FPM/4.0MPM 187 168 6,000lbs/2,722kgs 11.2FPM/3.4MPM 246 220 8,000lbs/3,650kgs 9.5FPM/2.9MPM 314 260 9,500lbs/4,309kgs 8.2FPM/2.5MPM 370 300
Use the navigation bar above to navigate to other subpages!